American DJ 3 Sixty 2R User Instructions Download Page 2

Unpacking: 

Thank you for purchasing the 3 Sixty 2R by ADJ Prod-

ucts, LLC. Every 3 Sixty 2R has been thoroughly tested and has been 

shipped in perfect operating condition. Carefully check the shipping 

carton  for  damage  that  may  have  occurred  during  shipping.  If  the 

carton appears to be damaged, carefully inspect your fixture for any 

damage and be sure all equipment necessary to operate the unit has 

arrived intact. In the event damage has been found or parts are miss-

ing, please contact our toll free customer support number for further 

instructions. Please do not return this unit to your dealer without con-

tacting customer support first. 

Introduction: 

The 3 Sixty 2R is a DMX intelligent, moving head fix-

ture. The 3 Sixty 2R can be a 21 channel, 24 channel, or 32 Channel 

DMX unit. The fixture can operate in three different operating modes; 

show mode, sound-active, or under DMX control. The 3 Sixty 2R can 

be used as a stand alone unit or in a master/slave configuration. For 

best results use fog or special effects smoke to enhance the beams 

projections. 
During the initial start-up or use of this product a light smoke or 

smell may arise from the unit. This is a normal process and is 

cause by the heat associated with the lamp.

 

Customer Support:

  ADJ  Products,  LLC  provides  a  toll  free  cus-

tomer support line, to provide help and to answer any question should 

you encounter problems during your set up or initial operation. You 

may also visit us on the web at www.adj.com for any comments or 

suggestions. Service Hours are Monday through Friday 8:00 a.m. to 

4:30 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2610

 

E-mail:  

[email protected]

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

  3 Sixty 2R         

                                        General Information

ADJ Products, LLC  -  www.adj.com  - 3 Sixty 2R Instruction Manual Page 3

ADJ Products, LLC  -  www.adj.com  - 3 Sixty 2R Instruction Manual Page 2

Table of Contents

Unpacking......................................................................3

Introduction....................................................................3

Customer  Support......................................................................3

Safety Precautions......................................................................4

Features.........................................................................5

Handling Precautions..................................................................6

Registration......................................................................6

Important Discharge Lamp Warnings.........................................7

Mounting.........................................................................8

Controls and Functions.............................................................10

DMX Set-Up..............................................................................13

System Menu............................................................................16

Error Codes...............................................................................38

Operation...............................................................................40

DMX Traits.................................................................................43

Photometric Chart.....................................................................63

Lamp Replacement...................................................................64

Fuse Replacement....................................................................64

Cleaning..................................................................................65

Trouble Shooting.......................................................................65

Warranty.........................................................................66

Specifications....................................................................69

Please see page 7 for important lamp instructions!

Summary of Contents for 3 Sixty 2R





































Reviews: