13
Paper Feed Lever in the down position
Paper Feed Lever in the up position
2.
Move the “Paper Feed Lever” back to the DOWN position. Slide a new roll of paper onto the “Roll
Holder,” oriented so the paper comes off on the side toward the printer (refer to Figur
e P3 for the
correct placement).
3.
Wrap the paper under the “Paper Guide” and begin to feed it into the “Paper Slot.” You do not
need to fold or cut the paper in any way; it should be left square in the front. At a certain point as
the paper is being fed in, the printer will detect it and automatically feed it to the printing position.
When done, the setup should look like Figure P3.
Paper
Feed
Lever
Summary of Contents for AC2006
Page 2: ...2...
