3. Attach end panels A to posts D and E with six–4" Connector Bolts and four–4 3/8" Connec-
tor Bolts with lock washers as shown in Figure 3.
4"
Connector
Bolt
4 3/8"
Connector
Bolt
4"
Connector
Bolt
Small End Panel
2 Pcs.
FIGURE 3
Posts
Posts
E
D
A
4 3/8"
Connector
Bolt
add Lock Washer
add Lock Washer
add Lock Washer
add Lock Washer
Metal
Inserts
Metal
Inserts
3/4"Connector Bolts
with Lock Washer
Posts
Posts
E
D
Crib Spring
1 Pc.
FIGURE 4
G
Pivot Arms
4. Attach crib spring G to metal insert with four–3/4" Connector Bolts with lock washers, using
Allen Wrench provided. See Figure 4. There are three metal inserts for height adjustment of crib
spring.
Note: Crib spring should be lowered as child grows to discourage child from trying
to climb out.
Caution: Any mattress used in this crib must be at least
27 1/4 inches by 51 5/8 inches with a thickness not
exceeding 6 inches.
Warning label facing out.
Label must be visible at all
times. Do not remove label.
WARNING
LABEL
