background image

Every  WM-700HH™  and  WM-700LAV™  has 
been thoroughly tested and has been shipped 
in perfect operating condition. Carefully check 
the shipping carton for damage that may have 
occurred during shipping. If the carton appears 
to  be  damaged,  carefully  inspect  your  wire-
less microphone for any damage and be sure 
all  equipment  necessary  to  operate  the  wire-
less microphone has arrived intact. In the event 
damage has been found or parts are missing, 
please  contact  our  toll  free  customer  support 
number for further instructions. Please do not 
return  the  wireless  microphone  to  your  dealer 

without first contacting customer support.

©

American Audio

®

   -   www.americanaudio.com   -   WM-700™ Instruction Manual Page 3

WARRANTY INFORMATION

The  WM-700HH™  and  WM-700LAV™  carries 
a  ONE  year  (365  days)  limited  warranty.  This 
warranty covers parts and labor. Please fill out 
the  enclosed  warranty  card  to  validate  your 
purchase  and  warranty.  All  returned  service 
items whether under warranty or not, must be 
freight pre-paid and accompany a return autho-
rization (R.A.) number. If the unit is under war-
ranty,  you  must  provide  a  copy  of  your  proof 
of purchase invoice. Please contact American 
Audio

®

 customer support at (800) 322-6337 for 

a R.A. number.

 

 WM-700™ 

 

 

     

                         PROdUCT INFORMATION

The  serial  and  model  number  for  this  unit  is 
located  on  the  rear  panel.  Please  write  down 
the  numbers  here  and  retain  for  future  refer-
ence. 

Model No._____________________________

Serial No._____________________________

Purchase Notes:
Date of Purchase_______________________

Dealer Name__________________________

Dealer Address_________________________

_____________________________________
_____________________________________

Dealer Phone__________________________

I.  Heat - The receiver should be situated away 
from heat sources such as radiators, heat reg-
isters,  stoves,  or  other  appliances  (including 
amplifiers) that produce heat.

2.  Do not let insecticides, benzene, or thinner 
come in contact with the surface of the unit.

3.    Never  disassemble  or  modify  your  unit  in 
any way, doing so will void your manufactures 
warranty.

4.  Never plug this unit in to a dimmer pack

5.    Do  not  attempt  to  operate  this  unit  if  it 
becomes damaged in any way.

6.  This unit is intended for indoor use only, use 
of this product outdoors voids all warranties.

7.    Always  mount  this  unit  in  safe  and  stable 
matter.

8.

  Disconnect from main power before making 

any type of connection.

WARNING:  TO  PREVENT  FIRE  OR  SHOCK 
HAZARD,  DO  NOT  EXPOSE  THIS  UNIT  TO 
WATER OR MOISTURE 

NOTE: This product satisfies FCC regulations 
when  shielded  cables  and  connectors  are 
used to connect the unit to other equipment. 
To  prevent  electromagnetic  interference  with 
electrical appliances such as radios and tele-
visions,  use  shielded  cables  and  connectors 
for connections.

Summary of Contents for WM-700












Reviews: