background image

This symbol is intended to alert the user to the presence of non insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to 

constitute a risk of electric shock to persons.

This symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CaUtIon:

 risk of the electrical shock - 

Do not open!

CaUtIon:

 To reduce the risk of electrical shock, do not remove cover. No user serviceable parts inside. Refer all  servicing to qualified service personnel.

WarnIng:

 To prevent electrical shock or fire hazard, do not expose this amplifier to rain or moisture. Before using this amplifier, read the user manual for further warnings.

Ce symbole est utilisé pur indiquer  à l’utilisateur la présence à l'intérieur de ce produit de tension non-isolée dangereuse pouvant être d'intensité suffisante pour 

constituer un risque de choc électrique.
ce symbole est utilisé pour indiquer à l’utilisateur qu'il trouvera d'importantes instructions importantes sur l'utilisation et l'entretien de l'appareil dans la littérature 
accompagnant le produit.

ATTenTion: risque de choc électrique - ne pAS ouvrir!  
ATTenTion:

 Afin de réduire le risque de choc électrique, ne pas enlever le couvercle. Il ne se trouve à l’intérieur aucune piéce pouvant être réparée par l'utilisateur. Confier 

l'entretien à un personnel qualifié.

AverTiSSemenT:

 Afin de prévenir les risque de décharge ou de feu, n’exposez pas cet appareil à la pluie ou à l’humidité. Avant d’utiliser cet amplificateur, lisez les aver

-

tissements supplémentaries situés dans le guide.

este símbolo tiene el propósito de alertar al usuario de la presencia de  “voltaje peligroso“ que no tiene aislamiento dentro de la caja del producto que puede tener 

una magnitud suficiente como para constituir riesgo de corrientazo.

este símbolo tiene el propósito de alertar al usuario de la presencia de instrucciones importantes sobre la operación y mantenimiento en la literatura que vienc con 
el producto.

PreCaUCIón: 

 riesgo del choque eléctrico - 

no se abra

PreCaUCIón: 

Para disminuir el riesgo de choque eléctrico, no quite la cubierta. No hay piezas adentro que el usario puede reparar. Deje todo mantenimiento al los téc

-

nicos cualificados.

adVertenCIa: 

Para prevenir choque eléctrico o riesgo de incendios, no deja expuesto a la lluvia o a la humedad este amplificador. Antes de usar este amplificador, lea 

mas advertencias en la guia de operacion.

dieses Symobl soll den Anwender vor unisollierten gefährlichen Spannungen innerhalb des Gehäuses warnen, die von Ausreichender Stärke sind, um einen elek-

trischen Schlag verursachen zu können.

Dieses Symobl soll den Benutzer auf wichtige Instruktionen in der Bedienungsanleitung aufmerksam machen, die Handhabung und Wartung des Produkts betref

-

fen.

VorSICht:

 Risiko - Elektrischer Schlag! Nicht öffnen!

VorSICht:

 Um ddas Risiko eines elektrischen Schlages zu vermeiden, nicht die Abdeckung enfernen. Es befinden sich keine Teile darin, die vom Anwender repariert 

werden könnten. Reparaturen nur von qualifizierte Fachpersonal durchführen lassen.

aChtUng:

 Um einen elektrischen Schlag oder Feuergefahr zu vermeiden, sollte diesen Gerät nicht dem Regen oder Feuchtigkeit ausgesetz werden. Vor Inbetriebnahme 

unbedingt die Bedienungsanleitung lesen. 

©American Audio®  -  www.americanaudio.com  -  vX Series™ power Amplifier user manual  page 2

Summary of Contents for VX



















Reviews: