©
American Audio
®
- www.americanaudio.us - VMS5.0 Instruction Manual Page 15
LINE/PHONO SELECTOR SwITCH is in the “PHONO” position. CD players, Mp3 players,
and other line level instruments may only be connected to these jacks as long as the
line level Selector SWitch is in the “LINE” position.
MIDILOG 3: Phono/line level RCA input use to connect turntables, CD players, Mp3 play-
ers, or other line level sources. The type of input must directly reflect the selected mode of
the LINE/PHONO SELECTOR SwITCH. Turntables equipped with MM pickup cartridge (All
DJ turntable use MM pick-up cartridges) may be connected to these jacks as long as the
LINE/PHONO SELECTOR SwITCH is in the “PHONO” position. CD players, Mp3 players,
and other line level instruments may only be connected to these jacks as long as the
line level Selector SWitch is in the “LINE” position.
MIDILOG 4: Line level RCA input use to control CD players, Mp3 players, or other line level
sources.
42. PhONO gROUND - Be sure to connect turntable ground leads to either or both of the two
available ground terminals. This will reduce the humming and popping noises associated with
magnetic phono cartridges.
43. LInE/PHono SELEcToR SWITcH - These switches are used to change the voltage line lev-
els of there respected Line/Phono RCA inputs jacks. When connecting turntables with magnetic
cartridges to these jacks be sure the corresponding switch is in the “PHONO” position, and when
using line level input devices be sure this switch is in the “LINE” position.
44. MIC 2 - XLR and 1/4" combo jack for microphone connection. The volume output level for this
microphone will be controlled by its own respective volume knob.
45. MIC 1 - XLR and 1/4" combo jack for microphone connection. The volume output level for this
microphone will be controlled by its own respective volume knob.
rEAr pANEL - gENErAL FUNCTIONS ANd CONTrOLS
