©
American Audio
®
- www.americanaudio.us - VMS4.1 Instruction Manual Page 14
FRONT PANEL - GENERAL FUNCTIONS AND CONTROLS
Headphone Controls (28-30)
29. CUE/MASTER KNOB - Sets the headphone output from Cue or Master. When set to the Cue
position, the headphones will receive the signal from any and all channels with the Cue button acti-
vated. When set to the Master position, the headphones will receive the pre fader master output
signal, allowing you to cue the master at any output level and even if it is fully off. Any knob settings
in between Cue and Master will blend the Cue and Master signals.
30. HEADPHONE GAIN - Will set the output level of the headphones.
31. HEADPHONE JACK - Connect your headphones to this jack. The headphone signal is con-
trolled by the controls described previously.
