• If you use a stand, make sure to observe the following precautions in order to avoid toppling the device or
causing damage to the internal components.
-‐ Check the stand’s specifications and make sure that it is sturdy enough to support the weight of the speaker.
-‐ Mount only one speaker on each speaker stand.
-‐ Use the supplied screws if included.
-‐ Tighten fastening screws securely.
-‐ Use the speaker stands with their legs fully opened.
-‐ Use the stand at a height of less than 140cm.
-‐ Add weight such as sand bags around the stand legs to prevent them from falling over.
-‐ Remove the speakers from the stands before moving the stands or adjusting their height.
-‐ Limit the number of people around the placed stand.
• Always consult qualified service personnel if the device installation requires construction work, and make
sure to observe the following precautions.
-‐ Choose mounting hardware and an installation location that can support the weight of the device.
-‐ Avoid locations that are exposed to constant vibration.
-‐ Make sure to use the specified hardware.
-‐ Inspect the device periodically.
• When transporting or moving the device, always use two or more people. Attempting to lift the device by
yourself may damage your back, result in other injury, or cause damage to the device itself.
• Before moving the device, remove all connected cables.
• Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight,
near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the
internal components.
• Do not place the device in an unstable position where it might accidentally fall over
Connecting to power Amplifier
• Before connecting the you speakers to an Amp make sure that the Amp is Off. Before turning the power on
or off for all devices, set turn down the level all the way.
• Use only speaker cables for connecting speakers to the speaker jacks. Use of other types of cables may result
in fire.
• Be sure to observe the amplifier’s rated load impedance, particularly when connecting speakers in parallel.
Connecting an impedance load outside the amplifier's rated range can damage your amplifier.
Summary of Contents for Sense 8
Page 1: ...AMERICAN AUDIO Senseries Professional Speaker Line Owners Manual...
Page 4: ......
Page 5: ......
