Model:
Q-SPAND 4 Channel Mixer
POWER SUPPLY:
AC 120/220V, 50/60Hz Selectable
DIMENSIONS:
482 x 176 x 72mm
WEIGHT:
7 Lbs. / 2.8 kg
CROSSFADER:
Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION:
5W typical, 7W w/ full headphone output
HEADPHONE IMPEDANCE:
16 Ohms
ENVIRONMENTAL CONDITION:
Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85% RH
(non-condensing); Storage Temperature: -20 to 60 deg. C
Input Sensitivity (Level/Impedence):
LOAD=47K OHM
LINE:
14dBV (200mV)10K Ohm ±3dB
PHONO:
-50dBV (4mV)47K Ohms ±3dB
MICROPHONE:
-54 dBV (3.6mV0 /3K Ohms ±3 dB
AUX:
-14 dBV (200mV)/47K Ohms ±2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms
MASTER OUT (XLR):
0dBV (1V)/470 Ohms ±3dB
REC
OUT
(RCA):
-5.5dBV (316mV)/1K Ohms ±3dB
PHONES (LOAD=32 OHMS):
-2dBV (0.4V)/33 Oms ±3dB PGM IN
Maximum Output (Load = 47K, THD = 5%)
MASTER/ZONE:
< 18dBV (8V)
REC:
< 18dBV (8V)
PHONES (Load=32 ohms):
< 4.6dBV (1.7V)
CHANNEL BALANCE:
WITHIN 3dB
Frequency Response:
LINE/AUX:
20Hz - 20KHz, ±2dB
PHONO:
20Hz - 20KHz, +2/-3dB (RIAA)
MICROPHONE:
20Hz - 20KHz, +2,-3dB
Output Noise (IEC-A WEIGHTED):
LINE/AUX:
LESS THAN -70dBV
PHONO:
LESS THAN -65dBV
MIC:
LESS THAN -55dBV
THD - Total Harmonic Distortion (1Khz, 0dBV Output):
MASTER OUTPUT (LOAD = 47K OHMS):
LESS THAN 0.2%
PHONO: (LOAD = 32 OHMS):
LESS THAN 0.3%
CROSS TALK:
< 40dB @ 1Khz, Between left and right channels
Channel Equalizer:
BASS:
+12 ±1dB,-27 ±2 dB at 70KHz
MID:
+12 ±1dB,-22 ±2 dB at 1KHz
TREBLE
:
+13
±1dB,-14
±2
dB
at
13KHz
Microphone Equalizer:
BASS:
+12 /-17 ±2dB, at 70KHz
TREBLE:
+12 /-22 ±2dB, at 13KHz
Q-SPAND™
Specifications
©
American Audio
®
- www.americandj.com - Q-SPAND™ Instruction Manual Page 16