Model:
Q-D6, Professional 3 Channel Preamp Mixer
POWER SUPPLY:
AC9V, 1000mA
DIMENSIONS:
10”W x 12.25”D x 3.25”H /254 x 308 x 82.5 mm
WEIGHT:
7 Lbs. / 3.2 Kg
CROSSFADER:
Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION:
5W typical, 7W w/ full headphone output
HEADPHONE IMPEDANCE:
32 Ohms
ENVIRONMENTAL CONDITION:
Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%
RH (non-condensing); Storage Temperature: -20 to 60 ˚C
Input Sensitivity (Level/Impedence):
LOAD=100K OHM
LINE, AUX:
-14dB (200mV)/10K Ohms ±2dB
PHONO:
-50dB (3.16mV)/47K Ohms ±2dB
MICROPHONE:
-60dB (1mV) /2.2K Ohms ±2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms,
LOAD=100K OHM
MASTER OUT (XLR):
600 Ohms / +4dB (1.23V) +/-2dB
MASTER OUT (RCA):
1K Ohms
REC OUT (RCA):
-10dB (316mV)/2.2K Ohms ±2dB
PHONES (LOAD=32 OHMS):
0dB (1V)/33 Oms ±2dB (Cue Mixing at Center)
Maximum Output (Load = 100K, THD = 1%)
MASTER (RCA):
MORE THAN 18dB (8V)
PHONES (Load=32 ohms):
MORE THAN 4dB (1.6V)
CHANNEL BALANCE:
Within 3dB
Frequency Response:
LINE, AUX:
20Hz - 20KHz, +/-2dB
PHONO:
20Hz - 20KHz, +2/-3dB (RIAA)
MICROPHONE:
20Hz - 20KHz, +1.5/-3dB
Output Noise (MAX. GAIN, EQ FLAT, W/ 20KHz LPF, A-WEIGHTED):
LINE/AUX:
MORE THAN 90dB
PHONO:
MORE THAN 72dB
MIC:
MORE THAN 62dB
THD - Total Harmonic Distortion (20Khz, 0dB Output):
LINE:
Less than 0.015% 20-20KHz
CROSS TALK:
LINE, AUX:
MORE THAN 65dB AT 1KHz between L and R
MORE THAN 70dB AT 1KHz between Channels
Channel Equalizer:
BASS:
9 +/-2dB at 70Hz / -25 +/-3dB at 70Hz
MID:
9 +/-2dB at 1KHz / -27 +/-4dB at 1KHz
TREBLE
:
9 +/-2dB at 13KHz / -15 +/-3dB at 13KHz
Microphone Equalizer:
BASS:
10 +/-2dB at 1000Hz / -10 +/-2dB at 100Hz
TREBLE:
10 +/-2dB at 10KHz / -10 +/-2dB at 10KHz
Q-D6™
Specifications
©
American Audio
®
- www.americanaudio.us - Q-D6™ Instruction Manual Page 16
