©
American Audio
®
- www.AmericanAudio.com - Q-2422/SX User Instructions page 12
the right, and you move it at least 20% to the left position, any player connected to the
"A" PLAYER
CONTROL
will begin to play. You can create great effects similar to scratching with this feature.
31. RCA MASTER OUTPUTS -
The Master Output includes a pair
XLR BALANCED JACKS (28)
as well as a pair
RCA UNBALANCED
JACKS
. The RCA jacks send a low current unbalanced output signal. These jacks should only be
used for shorter cable runs to signal processors or looping to another mixer. For cable runs greater
than 15 feet use the
XLR BALANCED JACKS (28).
32. ZONE LEVEL OUTPUTS -
The RCA jacks send a low current, unbalanced output signal. These jacks should only be used for
shorter cable runs to signal processors or looping to another mixer.
33. REC OUT -
This is a low current unbalanced output source designed for various tape and CD recorders. The
Record Out (REC OUT) level is dictated by the
CHANNEL FADER LEVEL (6)
, it is not influenced by
the
MASTER VOLUME CONTROL (13).
34. CHANNEL 3 - LINE 3/ LINE 4 RCA INPUT JACKS -
Connect CD players or Tape Decks to these line level inputs. Line level musical instruments with
stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs.
Turntables should only be connected to "Phono" inputs. The red colored RCA jack represents the
right channel input and the white represents the left channel input.
35. CHANNEL 2 JACKS -
PHONO 2/AUX2 INPUT JACKS -
The type of input must directly reflect the selected mode of
the
CHANNEL 2 - LINE LEVEL SELECTOR SWITCH (36)
. Connect turntables equipped with
MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges). CD
players or Tape Decks and other line level instruments may be connected to these jacks as long
as the
CHANNEL 2 - LINE LEVEL SELECTOR SWITCH (36)
is in the "AUX 2" position. The
red colored RCA jack represents the right channel input and the white represents the left
channel input.
LINE 2 RCA INPUT JACKS -
Connect CD players or Tape Decks to these line level inputs. Line
level musical instruments with stereo outputs such as Rhythm Machines or Samplers should
also be connected to LINE inputs. Turntables should only be connected to "Phono" inputs. The
red colored RCA jack represents the right channel input and the white represents the left
channel input.
36. LINE LEVEL SELECTOR SWITCH -
CHANNEL 1 -
This switch is used to change the mode of
CHANNEL 1 - PHONO 1/AUX1
INPUT JACKS.
When connecting turntable to these jacks be sure the switch is in the PHONO
position, and when using line level input devices select AUX.
Always be sure main power is
shut off before change the position of the Line Level Selector Switch.
CHANNEL 2 -
This switch is used to change the mode of
CHANNEL 2 - PHONO 2/AUX2
INPUT JACKS.
When connecting turntable to these jacks be sure the switch is in the PHONO
position, and when using line level input devices select AUX.
Always be sure main power is
REAR PANEL - CONTROLS AND FUNCTIONS
