©
American Audio
®
- www.americandj.com - Pro-Scratch 2™ Instruction Manual Page 13
GENERAL FUNCTIONS AND CONTROLS (Cont.)
D. LCD DISPLAY PANEL (FIGURE 6)
44. PLAY INDICATOR -
This indicator will glow
when the unit is in play mode.
45. EFFECT INDICATOR -
This indicator glows
when any of the nine built-in effects are selected.
46. SINGLE INDICATOR -
This indicates that the
CD drive is in single play mode, the track will play
once and return to CUE mode. If the single indi-
cator is not on the unit is in continuous mode In
continuous mode the drive will play all the remain-
ing tracks on the disc. Once the remaining tracks
have ended the unit will return to cue mode
47. LOOP -
This icon will flash when you are in
loop mode. This icon will glow when a loop has
been created but is not actively playing.
48. RELOOP INDICATOR -
Appears when LOOP
is engaged or ready to be engaged.
49. PAUSE INDICATOR -
This indicator will glow
when the drive is in pause mode.
50. TRACK INDICATOR -
This indicator describes
which track is currently cued or is playing.
51. CUE INDICATOR -
This indicator will glow
when the unit is in CUE or mode and will flash
every time a new CUE POINT is set.
52, 53, 54. TIME METERS -
These indicators will
detail the current Minutes, Seconds, and Frames.
The meter will display either the elapse, total, or
remaining time of a track or the entire disc. The
display time will depend on the selected time func-
tion. The selected time function will be displayed
above the TIME METER as
TOTAL REMAIN (58),
REMAIN (58) OR ELAPSE (59).
55. MEMORY BUCKET INDICATOR -
This indi-
cator serves two functions. The red bucket out-
line details the cue memory status, a full bucket
outline indicates the cue memory is full. The five
bars in the memory bucket detail the anti-shock
memory state. Each bar indicates 2 second of
digital anti-shock
56. PITCH METER -
This meter will display either
the pitch percentage applied by the
PITCH SLID-
ER (33).
57. TIME BAR INDICATOR -
This bar gives a
visual approximation of a track's or disc's time
This bar will begin to flash when a track is end-
ing. The flashing bar is great reminder, that time
is running out to get that next track ready to go.
58. LOCK INDICATOR -
This indicates the unit
control are in lock mode, see page 23.
59. P.S.P. INDICATOR -
This indicates which, if
any, of the effect presets is in use.
60. TOTAL/REMAIN INDICATOR -
When TOTAL
is indicated in the
LCD DISPLAY (19)
the
TIME
DESCRIBED (52, 53, & 54)
in the
LCD (19)
will define the total disc remaining time. When
REMAIN is indicated in the
LCD DISPLAY (19)
the
TIME DESCRIBED (52, 53, & 54)
in the
LCD
will define the current track's remaining time.
61. ELAPSE INDICATOR -
When this indicator
is on it will define the time displayed in the
TIME
METER (52, 53, & 54)
as the current track’s
elapse time.
88
00
:00 00
160
EFFECT
ELAPSED
SINGLE
TOTAL REMAIN
CUE
T
M
S
F
LOOP
RELOOP
.
--
50
52
53
54
55
56
51
49
60
61
58
48
47
46
45
44
Figure 6
0
59
LOCK
57
