©American Audio® www.americanaudio.eu PPA-210™ User Manual Page 22
M
OUNTING
The PPA-210™ also includes a pole mount option. The pole mount socket located on the
bottom of the speaker may be used to secure the speaker to a speaker tri-pod, such as the
American Audio® SPS-1B or the SPS-2B.
Always be sure to follow the guidelines listed below when pole mounting your speaker:
Always be sure the stand is designed to support the weight of the speaker
In outdoor situations that are prone to windy conditions and strong wind gust, be sure
to use sandbags as additional tri-pod support, this will greatly reduce the risk of tipping
Do not stack speakers on top of each other when mounting on a tri-pod. Only one
speaker should be mounted to a tri-pod at one time.
Always position the tri-pod legs away from foot traffic
Extend the tri-pod legs to their fully extended position to avoid accidental tipping
Observe and follow all safety guidelines and regulations specified by the tri-pod’s
manufacturer
Be sure the tri-pod is situated on a flat, level, and stable surface
Always tighten all tri-pod locks
