POCKET RECORD
RECORDING CONT.
RECORDING TO BUIlT IN & ExTENSION MICROPhONES:
1. The Pocket Record is equipped with two built-in microphones.You can adjust sensitivity level of
the built-in microphones using the built-in MICROPhONE SENSITIVITY SELECTOR (12). The high
sensitivity level of the built-in microphone is -45dB (at 1Khz), while the low sensitivity level is
-35dB (at 1KHz). You may also adjust the
AUDIO IN VOLUME CONTROL
(7 & 8) to make slight vol
-
ume adjustment.
2. There are two Audio-in jacks for the Pocket Record a left and a right (9 & 10). They allow you to
plug two extension microphones into the jacks for recording. If you use an extension microphone
you must put the AUDIO IN SELECTOR switch (11) in the microphone “M” position. The two AU-
DIO-In jACKS (9 & 10)
both provide DC 1.5V power. You may use either the built in microphones or
extension microphones as recording sources. When using extension microphones you may adjust
the AUDIO IN VOLUME CONTROL
knobs (7 & 8) for a proper recording sound level.
3. The recording source of the built-in microphones and the extension microphones will be mixed
into two separate tracks (Left and Right channels) with a balanced level.
4. You can turn off the built-in microphones when recording using another source. Simply, switch the
MICROPhONE SENSITIVITY SELECTOR (12) to the OFF positions.
RECORD FROM ElECTRIC GUITaR OR lINE IN:
1. The Pocket Record allows you to plug in an electric guitar as recording source. When using an
electric guitar you must put the AUDIO IN SELECTOR switch (11) in the Guitar “G” position. When
using an electric guitar you may adjust the
AUDIO IN VOLUME CONTROL
knobs (7 & 8) for a proper
recording sound level.
2. The Pocket Record allows you to plug in a line-in source such as a CD player, tape deck, radio,
etc as a recording source. When using a line in source you must put the AUDIO IN SELECTOR
switch (11) in the Line In “L” position. When using a line in source you may adjust the
AUDIO IN
VOLUME CONTROL
knobs (7 & 8) for a proper recording sound level.
3. The recording source of the built-in microphones and the electric guitar or line in recording source
will be mixed into two separate tracks (Left and Right channels) with a balanced level.
4. You can turn off the built-in microphones when recording using another source. Simply, switch the
MICROPhONE SENSITIVITY SELECTOR (12) to the OFF positions.
©
American Audio
®
- www.americanaudio.us - TT-Record™ Instruction Manual Page 9