background image

©American Audio®  -  www.americanaudio.us  -  ELX Series Power Amplifier User Manual  Page 14

The ELX Series carries a one year limited warranty. We recommend you fill out the enclosed warranty card to validate your purchase. All 

returned service items whether under warranty or not, must be freight pre-paid and accompany a R.A. (return authorization) number. If the 

mixer is under warranty, you must provide a proof of purchase invoice. You may obtain a R.A. number by contacting our customer support 

team on our toll free number. 

Please contact American Audio

®

 customer support at (800) 322-6337 for a R.A. number. All package 

not displaying a R.A. number on the outside of the package will be returned to the shipper.
1-YEAR LIMITED WARRANTY

A.  American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and work-

manship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United 

States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable 

evidence, at the time service is sought. 
B.  For warranty service, send the product only to the American Audio® factory. All shipping charges must be pre-paid. If the requested repairs or 

service (including parts replacement) are within the terms of this warranty, American Audio® will pay return shipping charges only to a designated 

point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with 

the product. If any accessories are shipped with the product, American Audio® shall have no liability whatsoever for loss of or damage to any such 

accessories, nor for the safe return thereof.  
C.  This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which American Audio® con-

cludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American Audio® 

factory unless prior written authorization was issued to purchaser by American Audio®; if the product is damaged because not properly maintained 

as set forth in the instruction manual. 
D.  This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specified above, 

American Audio® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects 

in material or workmanship. The sole responsibility of American Audio® under this warranty shall be limited to the repair of the product, or replace-

ment thereof, including parts, at the sole discretion of American Audio®. All products covered by this warranty were manufactured after January 1, 

1990, and bear identifying marks to that effect. 
E.  American Audio® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these 

changes in any products theretofore manufactured. 
F.  No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to 

the extent prohibited by applicable law, all implied warranties made by American Audio® in connection with this product, including warranties of 

merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including 

warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall 

be such repair or replacement as is expressly provided above; and under no circumstances shall American Audio® be liable for any loss or damage, 

direct or consequential, arising out of the use of, or inability to use, this product. 

 

G.  This warranty is the only written warranty applicable to American Audio® products and supersedes all prior warranties and written descriptions 

of warranty terms and conditions heretofore published. 

Summary of Contents for ELX 2000



















Reviews: