©
American Audio
®
- www.AmericanAudio.us - ELS GO 8BT - Instruction Manual Page 7
ELS GO 8BT
Rear Panel Controls and Features
Rear Panel:
1. LCD -
This screen will display all relevant information about the functions being selected or the
Mp3 file being played.
2. REPEAT/EQ BUTTON -
Press this button once to activate repeat, which will repeat the cur-
rently playing song until stop is pressed. Press and hold this button to activate EQ mode, which
let select among the different types equalization that can be applied the song currently playing.
3. USB/SD/BLUETOOTH BUTTON -
Press this button once to select the USB & SD drive. Press
this button again to select Bluetooth.
4. STOP/POWER BUTTON -
Press this button once to stop the Mp3 player. Press and hold this
button to turn the Mp3 player on/off.
5. STEREO INPUT -
3.5mm input jack for use with personal music players.
6. 1/4” OUTPUT -
This output jack is used to link to another speaker.
7. MP3 PLAYER VOLUME CONTROL -
This knob is used to regulate output volume of a con-
nected personal music player connected to the Stereo Input jack (5). Turning the knob in a
clockwise direction will increase the volume level.
8. TREBLE CONTROL – This knob is used to adjust the amount treble applied to the output sig-
nal. The maximum amount of treble gain is +15dB and the maximum amount of treble decrease
is -15dB. Turning the knob in a counter-clockwise direction will decrease the amount of treble
applied to a channel signal, turning the knob in a clockwise direction will increase the amount
of treble applied to a channel signal.
9. BASS CONTROL – This knob is used to adjust the amount bass applied to the output signal.
The maximum amount of bass gain is +15dB and the maximum amount of bass decrease is
-15dB. Turning the knob in a counter-clockwise direction will decrease the amount of bass ap-
plied to a channel signal, turning the knob in a clockwise direction will increase the amount of
bass applied to a channel signal.
10. MAIN POWER INLET & FUSE HOLDER – This connector is used to supply main power to the
unit via the included detachable power cord. The power connection uses an I.E.C. type con-
nector, use only the supplied polarized AC power cord. Use only a power cord that matches
this type of connection. Be sure to only connect this unit to a power outlet that matches the
printed power label on the unit. Never use a power when the ground prong has been removed
or broken off. The ground prong is used to reduce the risk of electrical shock in case of an
electrical short. This cord is designed to fit in one direction only. Do not attempt to force a
cord if it does not fit, be sure the cord is being inserted properly.
FUSE HOLDER – This housing stores the 5 amp GMA protective fuse for 100V and a 3.15
amp GMA for 230V. Always replace with the exact same type fuse, unless otherwise instruct-
ed, by an authorized American Audio
®
service technician. Replacing with any other type of
fuse than that of the recommended fuse will void your unit warranty.
11. ECHO LEVEL -
This knob is used to regulate the Echo output.
12. MAIN POWER SWITCH – This is the main power ON/OFF button. Before main power is
applied, be sure you have made all connections to the speaker. Remember to avoid damaging
pops to the speakers, the mixer is turned on first and turned off last.