©
American Audio
®
- www.AmericanAudio.us - DLS 15™/DLS 15P™ - Instruction Manual Page 4
DLS 15™/DLS 15P™
Safety Precautions
• The DLS 15™ and the DLS 15P™ loudspeakers can easily reproduce sound pressure levels
(SPL) sufficient enough to cause sever and permanent hearing damage. A great degree of care
should be taken to pro tect your ears to prolong exposure to SPL in excess of 85dB.
• For adult use only - Keep out of the reach of children.
• Be sure all power is turned off before making speaker connections
• Do not remove the speaker cover or grill under any conditions
• Always use a power cord that meets the manufactures exact power specifications
• Disconnect from main power before making any type of connection
• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
• This speaker is intended for indoor use only, use of this product outdoors voids all warranties.
• Always mount this speaker in safe and stable matter.
• Power Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the mixer.
• Heat -The speaker should be situated away from heat sources such as radiators, heat registers,
stoves, or other mixers (including amplifiers) that produce heat
• Be sure to save the packing carton in the event the unit needs to be returned for service
• Read all documentation before attempting to operate your new mixer. Please save all your docu-
mentation for future reference
• Do not spill water or other liquids in to or on to your speaker
• Be sure that the local power outlet matches that of the required voltage for your speaker.
• Do not attempt to operate this speaker if the power cord has been frayed or broken. Please route
your power cord out of the way of foot traffic
• Always have the gain controls set to their lowest level during initial power-up to prevent
speaker damage
• Servicing - The user should not attempt to service the speaker beyond that described in this
manual. All other servicing should be referred to qualified service personnel. The speaker should
only be serviced by qualified personal when;
A. Objects have fallen, or liquid has been spilled into the speaker
B. The speaker has been exposed to rain or water
C. The speaker does not appear to operate normally or exhibits a change in performance
D. The terminal/cross-over plate has been damaged
DLS 15™/DLS 15P™
Main Features
DLS 15P™ Speaker System:
• Heavy Duty Polypropylene Cabinet
• Built in XLR & 1/4” Mic and Line Level Inputs
• XLR and RCA Balanced Inputs
• Built-in Rigging Points
• 1/4” and XLR Line Outputs
• Built-in Pole Mount Socket
• Bass and Treble Tone Controls
• Clip and Power LEDs
• 300 Watts RMS - 1000 Watts Peak Power
• Built-in Heavy Duty Carrying Handle
• Attached heavy Duty Rubber Feet
DLS 15™ Speaker System:
• Heavy Duty Polypropylene Cabinet
• Dual 1/4” Phono Jack Connections
• Dual Speakon Type Connections
• Built-in Rigging Points
• LED Peak Indicator
• Built-in Pole Mount Socket
• High Output Two-Way System
• In and Out Jacks for Parallel Connections
• 225 Watts RMS - 900 Watts Peak Power
• Built-in Heavy Duty Carrying Handle
• Attached heavy Duty Rubber Feet
