BASIC OPERATIONS (CONT.)
Figure 27
©
American Audio
®
- www.AmericanAudio.us - CDI-300 Mp3™ Instruction Manual Page 21
13. BANK BUTTONS (9):
These buttons are used to store your samples and cue points. Only a sample
or a cue point can be stored into each of these three banks. When a sample is
stored in to these banks you may use the sample starting point as a cue point.
The
BANK BUTTONS
instantly recall and play any of your stored samples or
cue points without interrupting music playback. When in sample mode, (see
"Using the Built-In Sampler" on page 19) and during playback, pressing any of
the
BANK BUTTONS
that stores a sample, will immediately begin to play that
sample without interruption of music. If the unit is in sample mode and the drive
is not in playback mode, pressing any of the
BANK BUTTONS
that stores a
sample, will immediately begin to play that sample.
14. CHANGING THE TIME DISPLAY (42)/TIME BAR (41):
DURING NORMAL PLAYBACK, pressing the
TIME BUTTON (6),
will change the
time display information (41 & 42) in the
LCD (26)
. The following is a break down
of the time settings and their definitions:
TIME BAR INDICATOR
- Details the time defined in the
TIME METER (42)
as a visual bar icon. As with the
TIME METER (42)
this bar is also dependent on the selected time function
[REMAIN (44) OR ELAPSED].
This
bar will begin to flash when a track is ending regardless
of which time func
t
i
on you are in. Use the flashing
bar as a visual reminder that a track is ending.
Figure 28
