©
American Audio
®
- www.AmericanAudio.us - CDG-350 Instruction Manual Page 10
GENERAL FUNCTIONS AND CONTROLS - PLAYER UNIT
Figure 6
Figure 5
PLAYER UNIT - FACE (FIGURE 5)
21. DRIVE 1 TRANSPORT TRAY -
This tray is used to load and unload a compact disc into the drive
1 mechanism. The tray is opened and closed by pressing the DRIVE 1 OPEN/CLOSE BUTTON (22).
Never attempt to force the transport tray open or closed when the power is turned off.
22. DRIVE 1 OPEN/CLOSE (Transport Tray Open/Close) -
This button is used to open and close
the drive 1 transport tray. NOTE: When a disc is already loaded in the transport tray, the tray will not
open unless the unit is in pause or cue mode.
23. POWER SWITCH -
This switch is used to control the unit's main power. A blue LED directly above
the power switch will glow to indicate main power is active.
24. DRIVE 2 OPEN/CLOSE (Transport Tray Open/Close) -
This button is used to open and close
the drive 2 transport tray. NOTE: When a disc is already loaded in the transport tray, the tray will not
open unless the unit is in pause or cue mode.
25. DRIVE 2 TRANSPORT TRAY -
This tray is used to load and unload a compact disc into the drive
2 mechanism. The tray is opened and closed by pressing the DRIVE 2 OPEN/CLOSE BUTTON (24).
Never attempt to force the transport tray open or closed when the power is turned off.
TRANSPORT UNIT - REAR (FIGURE 6)
26. SWITCHED VIDEO OUT -
Connect a video cable to this output and the video signal can be
switched between Deck 1 & Deck 2 using a "Q" Start Mixer.
21
22 23 24
25
27
26
28
33
32
31 30
29
34
35
36
