©
American Audio
®
- www.AmericanAudio.us - ATX-15W - Instruction Manual Page 8
ATX-15W
Rear Panel Controls and Features
10. XLR PARALLEL OUTPUT JACK – This jack is used to send the incoming line level signal from
either of the Line Level Inputs Jacks to another ATX-15W or other line level input jack such as
a mixer or power amp.
11. MIC 2 XLR INPUT – This jack will accept a XLR Input. The volume output level for this
microphone will be controlled by the MIC 2 Volume knob (14).
12. MIC 1 XLR INPUT – This jack will accept a XLR Input. The volume output level for this
microphone will be controlled by the MIC 1 Volume knob (15).
13. LINE LEVEL/WIRELESS BUTTON - This button is used to switch between line level activity
and wireless activity. When the button is pressed “IN”, the Line Level Input/Wireless Volume
Knob (1) and Master Output Volume (2) will control the output of any wireless signal the speaker
is receiving. When the button is depressed, the Line Level Input/Wireless Volume Knob (1) and
Master Output Volume (2) will control the output of any device that is connected to the Line
Level Input (7).
14. MIC 2 LEVEL -
This knob is used to regulate the MIC 2 (11) output volume. Turning the knob
in a clockwise direction will increase the volume level.
15. MIC 1 LEVEL -
This knob is used to regulate the MIC 1 (12) output volume. Turning the knob
in a clockwise direction will increase the volume level.
16. WIRELESS ON/OFF - Pressing this button will activate the Wireless receiver. See next page
for Wireless Connectivity.
17. WIRELESS PAIRING - This button is used to wirelessly connect to another speaker. This
feature only allows 2 speakers to be connected, the Lead speaker and one connected speaker.
