Battery Insertion
Your hearing aids are designed to use size 10 batteries. A zinc-air type battery is
recommended, but any type or brand may be used.
•
To insert, remove the adhesive label and wait sixty seconds for air to activate the battery.
Any moisture on the battery surface should be wiped off prior to insertion. Insert the
battery into the battery door. It may take several minutes for the battery to work to its full
effect.
•
To remove the battery, open the battery door and lift the battery out of the battery door.
The Memory Selector Wand can also be used as a battery insertion and removal tool. To
use for this application simply touch the battery with the tip of the Memory Selector Wand
and insert or remove the battery as shown.
Low battery indicator:
When your battery voltage is low and in need of replacement you
will hear the low battery indicator. You will hear five beeps indicating that it is time to change
your battery. The warning beeps will be repeated.
Helpful hint:
It is recommended that you leave your battery door open when not using your
instruments. This will prolong the life of your batteries.
Battery disposal:
Please discard batteries in a safe place. Never dispose of batteries by
burning them. There is risk that they may explode, potentially causing serious injury. Never
put batteries with household waste, as they cause environmental pollution. Radio Shack
accepts dead hearing aid batteries.
Other precautions:
Keep batteries out of reach of children or anyone who may accidentally
swallow them. Never put batteries in your mouth for any reason. Do not store batteries in
medication containers or where they may possibly be mistaken for medication and
accidentally swallowed. Never attempt to recharge non-rechargeable batteries.