background image

 

Amer.com  

7259 Bryan Dairy Road, Largo, FL 33777   

© Amer.com Corp., 1997-2003  All rights reserved.  No part of this publication 
may be reproduced in any form or by any means or used to make any derivative 
such as translation, transformation, or adaptation without permission from 
Amer.com, as stipulated by the United States Copyright Act of 1976. 

Amer.com reserves the right to make changes to this document and the 
products which it describes without notice.  Amer.com shall not be liable for 
technical or editorial errors or omissions made herein; nor for incidental or 
consequential damages resulting from the furnishing, performance, or use of 
this material. 

Amer.com is a registered trademark of Amer.com.  All other trademarks and 
trade names are properties of their owners. 

FCC Class A Certification Statement 

Model SR24G2 FCC Class A 

This device complies with Part 15 of the FCC rules.  Operation is subject to the 
following two conditions: (1)This device may not cause harmful interference, 
and (2)This device must accept any interference received, including 
interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules.  These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation.  This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular 
installation.  If the equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of 
the following measures: 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and receiver. 

Summary of Contents for SR24G2






















Reviews: