Amedia DMA 3.1L User Manual Download Page 6

Amedia Networks, Inc.                                                                                                  

DMA3.1L User Manual 

 

 

b) The video input is selected by automatic detection of a video signal in one of the inputs. If two inputs 
become active simultaneously, the order of precedence is: S-video, Composite video. 
 
c) Video standards supported on video inputs: NTSC and PAL. 
 
d) The system supports NTSC Closed Caption signals. The CC signals are accepted at the video inputs 
and transferred to the video outputs. 

10.1.2 

Audio Inputs 

The Wireless AV Sender supports an analog stereo audio input, consisting of Left and Right audio 
channels. 

10.2  Audio and Video Outputs 

The Wireless AV Receiver decodes the MPEG-2 stream, de-multiplexes the audio and video signals, and 
outputs the signals to the TV. The Wireless AV Receiver includes video and audio outputs. 

10.2.1 

Video Outputs 

a)

 

 

The Wireless AV Receiver supports two video outputs: 

 

-

 

Composite Video output 

-

 

S-Video output. 

 
b) Video output standard (NTSC/PAL) is according to video input. 
 
c) Video standards supported on video outputs: NTSC and PAL.

 

 

d) Support of Closed Caption signals. 

10.2.2 

Audio Outputs 

The Wireless AV Receiver supports an analog stereo audio output, consisting of Left and Right audio 
channels. 

10.3 IR Function 

The IR function enables the user to control the video source devices such as DVD and STB, even when 
the TV and the video source devices are not in the same room. The user can use the original remote 
control unit of the video source device by pointing the remote control at an IR receiver located at the 
Wireless AV Receiver. The IR receiver at the Wireless AV Receiver receives the IR signal, digitizes it, 
and sends it over the air to the Wireless AV Sender, which re-generates the IR transmission towards the 
video source device’s IR receiver. 

10.4 NTSC/PAL Auto-Detect 

The Wireless AV Sender automatically detects the NTSC/PAL system of the active input video source.  
The Wireless AV Receiver will output the same system correspondingly.  Video source and TV must be 
of the same system.   
 

 

Amedia Networks, Inc. 

2006 Amedia Networks (Unpublished) 

6

©

Confidential & Proprietary 

Summary of Contents for DMA 3.1L









Reviews: