Ameda Platinum 17803 Instructions Manual Download Page 10

Page: 10 / 36

10 |

ENGLISH

Guidance and Manufacturer’s Declaration – Electromagnetic Emissions

The Ameda Platinum Breast Pump is intended for use in the electromagnetic environment specified below. The

customer or the user of the Ameda Platinum Breast Pump should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

RF emissions CISPR 11

Group 1

The Ameda Platinum Breast Pump uses RF energy only for

its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby

electronic equipment.

RF emissions CISPR 11

Class B

The Ameda Platinum Breast Pump is suitable for use in all

establishments, including domestic establishments and

those directly connected to the public low-voltage power

supply network that supplies buildings used for domestic

purposes .

Harmonic emissions IEC

61000-3-2

Class A

Voltage fluctuations/flicker

emissions IEC 61000-3-3

Complies

Recommended separation distances between portable and mobile

RF communications equipment and the Ameda Platinum Breast Pump

The Ameda Platinum Breast Pump is intended for use in an electromagnetic environment in which radiated RF

disturbances are controlled. The customer or the user of the Ameda Platinum Breast Pump can help prevent

electromagnetic interference by maintaining a minimum distance between portable and mobile RF communica-

tions equipment (transmitters) and the Ameda Platinum Breast Pump as recommended below, according to the

maximum output power of the communications equipment.

Rated maximum

output power of

transmitter (W)

Separation distance according to frequency of transmitter (m)

150 kHz to 80 MHz

= 1,2√

80 MHz to 800 MHz

= 1,2√

800 MHz to 2.7 GHz

= 2,3√

0,01

0,12

0,23

0,1

0,38

0,73

1,2

2,3

3,8

7,3

100

For transmitters rated at a maximum output power not

listed above, the recommended separation distance

in meters (m) can be estimated using the equation

applicable to the frequency of the transmitter, where

is the maximum output power rating of the transmitter

in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation

distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations.

Electromagnetic propagation is affected by

absorption and reflection from structures,

objects and people .

GUIDANCE AND MANUFACTURER’S DECLARATION

MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and needs to be installed and put

into service according to the EMC provided in these Instructions for use. Portable and mobile RF communications

equipment can affect MEDICAL ELECTRICAL EQUIPMENT.
Warning: Portable RF communications equipment (including peripherals such as antenna cables and external anten-

nas) should be used no closer than 30 cm (12 inches) to any part of the Ameda Platinum Breast Pump, including

cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
Warning: Use of accessories, transducers and cables other than those specified or provided by the manufacturer of

this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this

equipment and result in improper operation.
Warning: Use of this equipment adjacent to or stacked with other equipment should be avoided because it could

result in improper operation. If such use is necessary, this equipment and the other equipment should be observed

to verify that they are operating normally.