43
4.7 Chaining Configuration
Chaining Configure is for MANDO-303 (Type 3) only. If the device is not MANDO-303 (Type 3), the
tab will be closed automatically.
For MANDO-303, please follow steps as below:
Step 1:
Enter the desired
MMSI number on “Chaining MMSI” column.
Step 2:
Select Parent MMSI or Child MMSI on “Parent/ Child” column.
Step 3:
Click on
“Create MMSI” first to create and save this chaining.
Step 4:
C
lick on “Read Device” to ensure all settings are properly saved.
Figure 4-7-1 Chaining Configuration
*NOTE:
Please noted that “Parent MMSI” only could be set one MMSI.
