13
3.2 Activation Process
1. Pull and break the red Anti-tamper Cap to reveal the
activation panel.
2. Hold the ON Button for 2 seconds:
- The ON LED flashes Orange during GNSS acquisition
- The ON LED flashes Green once the GNSS fix is acquired.
WARNING:
DO NOT COVER GNSS AREA WHILE ACTIVE (see
Figure 7 GPS/GNSS AREA Location
NOTE 1:
The GNSS receiver is activated (cold start) when ON is depressed and the Orange LED indicator will initially
flash changing to a Green LED indication when a position fix has been resolved.
NOTE 2:
The ON LED flashing sequence is the SOS Morse code flashed every 30 seconds.
NOTE 3:
The red Anti-tamper Cap breaks once pulled out and cannot be re-installed by the user.
Summary of Contents for AIS SART PLOMO-500
Page 1: ......
