3
Note:
You can connect the HDD data cable and the power cable first and then fix the HDD in the
device.
Please pay attention to the front cover. It adopts a vertical sliding design. You need to push
the clip first and then push down.
4.
Front Panel
The front panel is shown as in Figure 1.
Figure 1
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up
or shut down the DVR.
Up
Down
/
Activate current control, modify setting, and then move up
and down.
1. Loosen the screws of the
upper cover and side panel.
2. Attach four screws in the
HDD (Turn just three times).
3.
Place the HDD in accordance with
the four holes in the bottom.
4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
5.
Attach the HDD firmly
.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back on.
8. Secure the screws in the
rear panel and the side panel.