Amcrest General 1080P(V2) Mini 1U Series, User Manual, Page: 50 / 188

41
4.8 Operation
4.8.1 Search
Click search button in the main menu. The search interface is shown as below. See Figure 4-19.
Usually there are three file types:

R: Regular recording file.

A: External alarm recording file.

M: Motion detection recording file
Figure 4-19
Please refer to the following sheet for more information.
SN Name Function
1
Display
window

Here is to display the searched picture or file.

Supports 1/4/8-window playback.
2
Search
type

Here you can select to search the picture or the recorded file.

You can select to play from the read-write HDD, from a peripheral device, or from
a redundancy HDD.

Before you select to play from the peripheral device, please connect the
corresponding peripheral device. You can view all record files of the root directory
of the peripheral device. Click the Browse button; you can select the file you want
to play.
Important

Redundancy HDD does not support picture backup function, but it
supports picture playback function. You can select to play from redundancy
HDD if there are pictures on the redundancy HDD.
3 Calendar

The blue highlighted date means there is picture or file. Otherwise, there is no
picture or file.

In any play mode, click the date you want to see, and you can see the
corresponding record file trace in the time bar.
4
Playback
mode
and
channel
selection

Playback mode
：
1/4/9. (It may vary due to different series.)

In 1-window playback mode: you can select 1-16 channels.

In 4-window playback mode: you can select 4 channels according to your
requirement.

In 9-window playback mode: you can switch between 1-8 and 9-16 channels.
1
2
3
4
5
6
7
12
11
10
8
9
13