background image

GB

7

MAINTENANCE

Filter Cleaning

If the filter is covered by dust, the airflow and the performance of the unit will be 
affected, it may even cause machine damage. We recommend that you regularly 
clean the filter.
1. Turn off the unit and remove the filter from the unit.
2. Clean the filter with a vacuum cleaner or soft-brush.

Water-full Indicator and Water-tank Empty

1. When the water-tank is full, the water-full indicator turns on and the machine stops.
2. Hold the bottom of water-tank to pull it out and then carry it with its handle.
3. Open the water-tank cover to empty it .
4. Clean the water-tank to avoid mould growing.
5. Close the water-cover and put the tank back into the machine , the water-full

indicator turns-off and machine restarts.

Warning :

Do not remove the water tank immediately after the unit stops. Please wait a

   while to avoid the water dripping into the unit and causing damage.

Please clean the water tank with soft wet cloth. Do not use detergent or hot water.

Do not remove or damage the float switch in water-tank, otherwise the machine

will stop working.

Please make sure the water tank cover and handle are put back into place

correctly before the water tank is reinserted.

If the water-tank is inserted incorrectly, the tank full indicator will not turn off. 
Reinsert the water tank to turn the indicator off and resume normal use.

Continuous draining

This dehumidifier has a continuous drain hole, connected with a plastic pipe.
The water in the body will drain through the drain hole first, so ensure it is closed if 
using the water tank.

Cleaning

1.Before cleaning or performing maintenance, turn off the unit and unplug the cord.
2.Air-inlet and air-outlet may gather dust easily, please clean it often with a soft, 
   damp cloth. Let the unit dry before reuse. 

 

3

. Replace the filter in position.

At all times, avoid water entering the unit. It may cause electrical 
 hazard and damage the unit.
Do not place the wet clothes on top of the unit when in laundry mode 
in order to prevent water dripping into the unit.  For best laundry 
mode effect place the clothes within 1 meter of the unit.

Summary of Contents for AM-DD8L











Reviews: