Amcon Auto Chart Projector
6.3 Replacing the fuse
Warning
: Unplug the power cable before removing the fuse cover to
replace the fuse. Removing the fuse cover with the power cable
plugged in can cause electric shock.
Warning:
Use only attaching fuses (250 v, 1 A). Using other fuses
may cause a fire in the event that the instrument fails.
1) Turn the power switch off and disconnect the power supply plug.
2) The fuse holder is located just below the power supply socket. Pull on the fuse
holder to remove it. The fuse will be removed together with the holder.
3) Remove the blown fuses and insert the new fuses on the cap of the fuse holder
and install it as before.
23
