A
BOUT
THIS
M
ANUAL
SMD23E2 and SMD24E2 User Manual
ADVANCED MICRO CONTROLS INC.
8
Manual Conventions
Three icons are used to highlight important information in the manual:
NOTES
highlight important concepts, decisions you must make, or the implications of those
decisions.
CAUTIONS
tell you when equipment may be damaged if the procedure is not followed
properly.
WARNINGS
tell you when people may be hurt or equipment may be damaged if the pro-
cedure is not followed properly.
The following table shows the text formatting conventions:
Manual Conventions
Trademark Notices
The AMCI logo is a trademark of Advanced Micro Controls Inc. “CIP” is a trademark of Open DeviceNet
Vendor Association, Inc. “EtherNet/IP” is a trademark of ControlNet International, Ltd. under license by
Open DeviceNet Vendor Association, Inc. “PROFINET” is a registered trademark of PROFIBUS & PROFI-
NET International (PI). “Adobe” and “Acrobat” are registered trademarks of Adobe Systems Incorporated.
All other trademarks contained herein are the property of their respective holders.
Revision Record
This manual, 940-0S154, is the fifth release of this manual. It was released June 26
h
, 2020. It changes the
description of the CNPL cables, reorders some content, and add Synchrostep programming bits to the com-
mand data formats description.
Revision History
940-0S153 Fourth Release. January 10
th
, 2019.
940-0S152 Third Release. August 30
th
, 2018.
940-0S151 Second Release. February 23
rd
, 2018.
940-0S150 Initial Release. June 30
th
, 2015.
Format
Description
Normal Font
Font used throughout this manual.
Emphasis Font
Font used for parameter names and the first time a new term is introduced.
Cross Reference
When viewing the PDF version of the manual, clicking on a blue cross refer-
ence jumps you to referenced section of the manual.
HTML Reference
When viewing the PDF version of the manual, clicking on a red cross reference
opens your default web browser to the referenced section of the AMCI website
if you have Internet access.
Summary of Contents for SMD23E2 Series
