20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786
Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
Networked Indexer/Driver User Manual
I
NSTALLING
AN
AMCI N
ETWORKED
D
RIVER
93
1.4 Outline Drawings (continued)
1.4.2 SD31045E-K Outline Drawing
Figure T1.2 SD31045E-K Outline Drawing
1.5 Mounting Methods
There are two ways to mount an AMCI Networked Driver. The first method is with the #10-32 screws into the
side panel of the SD17060E-K or the back panel of the SD31045E-K. The second method is by the mounting
tabs. Mounting tabs are for #6 screws.
When using the panel mounting method that uses the #10-32 screws, minimum and
maximum screw lengths must be observed to prevent a screw from shorting to the PC
board or components.
There are airflow holes in the top and bottom of the enclosure. To ensure adequate con-
vectional airflow, the drive must be mounted in the orientation shown in the drawing.
Network Interface Area
Network
Interface
Area
2.67"
(67.8)
0.152" dia.
(3.86)
0.60"
(15.2)
4.00" (101.6)
0.70"
max.
Total clearance of 3.0"
needed for
Connector installation and removal.
(17.8)
(76.2)
#10-32 UNF-2B.
Two places.
Min. screw length = 0.31"
+ thickness of mounting panel.
Max. screw length = 0.62"
+ thickness of mounting panel.
(7.9)
(15.8)
INTERLOCK
INTERLOCK
GND
N
L
POWER
AC POWER
95 – 264 V
AC
50/60 Hz
INPUT 1
INPUT 1
INPUT 2
INPUT 3
OUTPUT 1
INPUT 2
INPUT 3
OUTPUT 1
