AMCI NR60E2, User Manual

Page: 95 / 98

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
PROFINET Protocol
PROFINET N
ETWORK
C
ONFIGURATION
95
7.6 Set the NR60E2 Parameters
The NR60E2 uses one of five telegrams to communicate cyclically with the controller. The format of the
telegrams is explained in the
PROFINET Cyclic Data Formats Reference chapter, starting on page 83.
With the NR60E2 icon selected on the PROFINET bus, click on the “Device view” tab. The view in the Hard-
ware Catalog will change.
1) In the Device overview pane, right click on “Module Access Point” and select “Properties” from the
resulting drop down list.
2) In the “Module Access Point [Module Access Point]” pane at the bottom of the screen, select “Module
Parameters”. The “Standard parameters (Encoder Profile)” will appear with the parameters set to their
default values. The parameter values can be changed here. The NR60E2 parameters are explained in the
Programmable Parameters section, starting on page 15.
Figure T7.5 Setting NR60E2 Parameters