5
A/C OUTLET
INPUTS
The
A/C
convenience
outlet
is
fitted
so
that
other
components
can
be
powered
when the AC line cord of your amplifier is
plugged into mains outlet.
You
must
fit
an
Standard
3
pin
plug,
available from most specialist dealers.
All audio Inputs and tape outputs are via
gold plated RCA type phono connectors.
All
the
phono
sockets
on
your
AMC
amplifier
are
marked
"L"
for
left
and
"R"
for right channels, with the left channels
nearer
the
top
of
the
cabinet.
Your
connection
leads
will
have
a
white
or
black plug for left, and a red plug for right.
Note: The A/C outlet is UNSWITCHED by
the power switch on your amplifier.
The maxinum output current rating
of A/C outlet is 1A.
UNDER NO CIRCUMSTANCES SHOULD
THE CASE OF THE AMPLIFIER BE
OPENED BY ANYONE OTHER THAN A
QUALIFIED ENGINEER, AS DANGEROUS
VOLTAGES ARE PRESENT INSIDE. ANY
UNAUTHORIZED REPAIR MAY INVALIDATE
YOUR WARRANTY.
USB CONNECTOR (XIA50 only)
PHONO INPUT (OPTION COAXIAL IN)
Note:
CD INPUT
TUNER INPUT
AUXILIARY INPUT
TAPE INPUT
The
USB
connector
is
for
connecting
to
computer,
other
equipments
with
USB,
LAN and so the Internet.
The analog output of the USB connector
is in parallel with auxiliary input.
This
input
is
suitable
for
both
moving
magnet
and
moving
coil
cartridges.
For
either type of cartridge the plugs on your
turntable lead should be connected to the
phono input sockets on the rear panel of
your amplifier.
A
switch
adjacent
to
the
disc
input
sockets allows the selection of either MM
or
MC
input.
Facing
the
back
of
the
amplifier, move the switch to the right for
use with MM or high output MC cartridges
and
to
the
left
for
use
with
normal(low
output) MC cartridges.
Never operate the MM/MC selector
switch with the volume control turned up
as
the
resultant
electrical
surge
may
damage your loudspeakers.
To
minimize
hum
the
turntable
lead
should
be
kept
away
from
the
mains
wiring, and any separate turntable ground
lead
should
be
attached
firmly
to
the
earth terminal on the rear of the amplifier.
The PHONO can be replaced with AMC
proprietary designed DAC to convert the
PHONO INPUT into a COAXIAL INPUT.
The CD input is suitable for use with any
CD player. Connect your CD player to the
amplifier using the phono sockets marked
"CD".
The
Tuner
input
is
suitable
for
use
with
most AM/FM tuners. Connect
your tuner
to the amplifier using the phono sockets
marked "Tuner".
The Auxiliary input is suitable for use with
any
extra
source
processing
a
line
level
output,
perhaps
a
second
tuner
or
CD
player,
or
an
additional
tape
or
video
recorder wired for replay only.
The auxiliary input is in parallel with the
analog output of the USB connector.
This
input
is
suitable
for
use
with
most
cassette, reel to reel or video recorders.
Connect
the
"record"
leads
of
your
tape
recorder
to
the
phono
sockets
marked
"Tape
out"
on
the
rear
of
your
amplifier
using phono/phono leads.