5
INPUTS
All audio Inputs and tape outputs are via
gold plated RCA type phono connectors.
All the phono sockets on your AMC
amplifier are marked "L" for left and "R"
for right channels, with the left channels
nearer the top of the cabinet.
Your
connection leads will have a white or
black plug for left, and a red plug for right.
1. OPTION INPUT (PHONO, COAXIAL,
OPTICAL IN)
PHOTO INPUT
The input is suitable for moving magnet
(MM) & Moving Coil (MC) cartridges. To
switch between MM & MC, please open
top cover and switch the MM/MC switch
on PHONO Module to the position you
will like to select. The PHONO Module is
located behind OPTION INPUT RCA
Jacks fixed to the side chassis. The plugs
on your turntable lead should be
connected to the Phone input sockets on
the rear panel of your amplifier.
COAXIAL/OPTICAL INPUT
A M C 2 4 b i t / 1 9 2 K H z D A C M o d u l e ,
MD1108s, can replace PHONO module to
have digital input in XIA100e/XIA150e.
The Coaxial/Optical switch can select
digital soruce.
2. iPod/DAC INPUT
The iPod/DAC input is suitable for use
with any iPod/DAC player. Connect your
iPod/DAC using the RCA sockets marked
iPod/DAC.
3. CD INPUT
The CD input is suitable for use with any
CD player. Connect your CD player to he
amplifier using the RCA sockets marked
"CD".
4. TUNER INPUT
The Tuner input is suitable for use with
most AM/FM, DAB+, Internet tuners.
Connect your tuner to the amplifier using
the RCA sockets marked "TUNER".
5. VIDEO INPUTS
The video input is suitable for most TV's
with an audio output.
Connect your TV
using the RCA sockets marked "VIDEO."
6. RECORD OUTPUT
This output is suitable for use with most
Audio or video recorders.
Connect the "record" leads of your
recorder to the RCA sockets marked
"RECORD" on the rear of your amplifier
using RCA/RCA leads.
7. AUXILIARY INPUT
The Auxiliary input is suitable for use with
any extra source processing a line level
output, perhaps a second tuner or media
player, or an additional video source
wired for replay only.
8. PRE OUT/MAIN IN
Normally the preamplifier and power
amplifier sections of this unit are
connected together via factory-installed
U-shaped metal jumpers that bridge the
PRE-OUT and MAIN-IN jacks. Check to
be sure that they are fully inserted into
the jacks and that nothing is touching
them.
By switching OFF the power and
removing the metal jumpers, you can
connect a signal processor such as a
surround-sound decoder or an electronic
crossover in the path between preamp
and power amp. Connect a cable from
PRE-OUT to the processor's input and a
second cable from the processor's output
to MAIN IN.