www.amcelettronica.com
The SR135 FIRE 24 V is a high-power back-up battery sounder (105 dB at 3 m) protected against tampering
(opening, tearing off). It features a 10 W fl asher and a sound/fl ash timer, variable with adjustable trimmer from
1 min. to 7 min., which trips in case of prolonged alarm (e.g.. connection cable cutting). It has a fi rst switch-on
stop function to prevent the sounder from tripping during installation (for enabling the sounder for normal use
it is necessary to activate/deactivate alarm start).
ADJUSTMENTS AND CONNECTIONS
Rated
power
voltage:
24
Vdc
Operating limit voltages:
20 ÷ 25 Vdc
Amp draw at max power:
1.5 A
Amp draw when not operating:
2.5 mA
Sound pressure (at Vn=12VDC):
110 dB (A) at 3 m
Light power:
10W
Sound and fl ash timer:
from 1 min to 7 min ± 20%
Buffer battery:
12 Vdc , 2 Ah
Dimensions:
236 mm (L) x 280 mm (H) x 99 mm (P)
Weight (with battery):
2700 g
Operating temperature:
- 25 °C ÷ + 55 °C
Flashing short-circuit protection fuse:
2 A
TECHNICAL SPECIFICATIONS
Trimmer TR1 : sound and fl ashing timer adjustment from 1’ to 7’ ± 20%
TAMPER terminals : N.C. contact for opening and rip-off
SUPPLY terminals : 24 VDC power supply ( rated )
START terminal :
“
positive missing
”
Jumper
J11=
open
Jumper
J12=
jumper
on
B
Jumper LAUNCHING =
female jumper on OFF
“
negative missing
” Jumper
J11=
closed
Jumper
J12=
jumper
on
A
Jumper LAUNCHING =
jumper on OFF
“
Start with positive
”
Jumper J11=
open
Jumper
J12=
jumper
on
A
Jumper LAUNCHING =
jumper on OFF
Connect a 10 Kohm resistor between terminal “START” and terminal “-12 V”
“
Start with negative
”
Jumper
J11=
open
Jumper
J12=
jumper
on
B
Jumper LAUNCHING =
jumper on OFF
Connect a 10 Kohm resistor between terminal “START” and terminal “+12 V”
ENGLISH
- Confi gure jumpers J11, J12 (leave LAUNCHING=OFF) according to sounder starting mode.
- Connect the 12 Vdc, 2 Ah buffer battery to the red and black wires with faston;
- Connect external 24 Vdc power supply to the terminals “24 Vdc no polarity” (polarity is not important);
- Connect sounder start wire from the alarm panel to the START terminal;
- The anti-opening and anti-tearing contacts must be connected to the relevant circuit of the alarm unit
through the TAMPER contacts;
- Time the trimmer to desired sound and fl ash;
- Close the metal cover using the provided screws;
- Close the sounder by means of the plastic cover.
INSTALLATION
