Function description
Amplifier
MICROPHONE 1 INPUT
This is unbalanced microphone input which has a priority over the microphone and AUX/PHONO input.
The priority is activating by connecting priority contacts to each other in the rear amplifier’s panel.
MICROPHONE 2 INPUT
This is unbalanced microphone input.
AUX/PHONO LEVEL CONTROL
This knob is designed for the AUX/PHONO input volume level controlling.
TONE CONTROL
3 band: low, mid and high tone control for sound adjusting.
MASTER VOLUME CONTROL
This knob is designed to adjust main volume of the amplifier.
POWER SWITCH
By using this switch amplifier can be turning on/off.
POWER INDICATOR
This LED lights up after amplifier's turning on.
FUSE
Replace the fuse only with one of the specified type, size and correct rating. Before replacing fuse
make sure that the amplifier power plug is disconnected from main power.
MAIN POWER CABLE
Before connecting the amplifier to main power make sure that the power cable and power plug
is not damaged. Never leave device plugged in to the outlet when it’s not being used for a long
period of time.
PRIORITY TERMINAL
The priority is activating by connecting priority contacts to each other in the rear amplifier’s panel.
OUTPUT TERMINAL
This terminal is designed to connect audio line into amplifier. There are available 4Ω, 8Ω, 16Ω and 100V
outputs. Please find same connection examples in page 7.
AUX/PHONO SELECTOR
This selector is designed to select the AUX or PHONO inputs.
AUX INPUT
This is line level input. Connector - stereo RCA.
PHONO INPUT
This is high sensitivity input for phonograph. Connector – stereo RCA.