USER MANUAL
iMIX 5
Matrix router
09
Operation
Rear panel operation
CONNECTORS FOR WC iMIX WALL CONTROL
These RJ45 ports are designed to connect WC iMIX wall controls by using
standard CAT 5 cable. WC1 control audio in output 1, WC2 control audio in
output 2 and etc…. WC iMIX controls must be connected directly to iMIX5, do
not use any computer network equipment. WC1 - WC5 ports incorporate RS485
interface, analogue audio line and +24V power. Maximum distance between
iMix5 and WC iMix is 500m.
CONNECTOR FOR MIC iMIX PAGE STATION
Connector dedicated for MIC iMIX page station. Do not connect to any com-
puter network equipment! MIC iMIX page station incorporate RS485 interface,
analogue audio line and +24V power. Maximum distance between MIC iMIX
and iMIX is 500m.
RS232 INTERFACE
Designed to control main function of IMIX5 by using serial interface. RS232
protocol is listed in page 12
EXTERNAL MUTE
Dry contact designed to MUTE all iMIX5 inputs and link audio from priority
input to all outputs. Audio signal from page station will not be muted.
PRIORITY INPUT
Priority input unbalanced audio input designed for emergency and other
high priority audio messages. Input became active after closed external mute
contact.
STEREO AUDIO OUTPUTS
Unbalanced line level stereo outputs. Audio in output 1 is controlled by WC
iMIX wall control connected to WC1 port. Audio in output 2 controls WC2 and
etc…
INPUTS GAIN CONTROL
This control allows precisely adjust inputs gain in order to have the same audio
level in all inputs.
STEREO AUDIO INPUT
Designed to audio source which will be selectable by using WC iMIX wall
controls.
PHANTOM POWER SWITCH
Set phantom power switch to “ON” position to activate phantom power to
microphone input. Maximum phantom power voltage is +24V. To disable phan-
tom power set switch to “off” position.
POWER SWITCH
Use this switch to power on/off iMIX5 is audio router.
MAIN POWER CONNECTOR
Connector is combined with fuse holder and 1 A 250V fuse.