7
6.5 inches
9.87
inches
Power
LED
HF Driver
(Tweeter)
LF Driver
(Woofer)
For optimal performance of the iM05, please read the following thoroughly and carefully prior to
installation.
Handling: Please do not touch the speaker cones. The iM05 set is packaged in the box tightly,
so your attention is required when taking the monitors out of the box. To avoid possible damage
to the speaker units, hold both sides of the monitor in order to pull it out of the box. The
speaker cones should not be touched in order to avoid damage even after they are out of the
box.
Connections: You can use either an XLR balanced cable or TRS balanced/unbalanced cable
from the input of each iM05 to your corresponding preamp, computer or game console outputs.
We recommend that you use high-quality balanced or unbalanced cables for input connections.
Also, ALWAYS turn off the power of the iM05 and turn the volume of the iM05 down to a
minimum before making the necessary connections.
Precautions
Correct Power Operation: Since the iM05 contains its own amplifier, it must be connected to a
power outlet using the detachable AC cable provided. Before connecting power, please make
sure that the Voltage-Select Switch located on the speaker's rear panel is set to the appropriate
position, as described in the rear-panel features list appearing earlier in this manual.
- Use of improper voltage may result in hazardous conditions and/or damage to
speaker components not covered by speaker warranty.
WARNING!
The front panel houses the Power LED, which indicates whether the speakers (amplifier) power
is on or off.
Front Panel Features
Installation
