AMC DSP 88, User Manual

Page: 13 / 28

ATTACK: The limiter attack time ranges from 0.3 to 1ms in 0.1ms steps, then ranges from 1 to 100ms in 1ms
steps.
RELEASE:
The limiter release time can be set at 2X, 4X, 8X, 16X or 32X the attack time.
Output Source
IN1 – 8: This sets the input channel source for the current output channel. It can be used to mix the input
source (in dB) or disable it (Off). If more than one input sources are enabled, they are added
together as the source for the current output channel.
Operating the system menus
The system menus allow the user to control and change parameters that are related to the system behavior
and general operation. It can be accessed by pressing the Sys key in the main menu (when no input /
output or system menu is activated). All system menus require pressing the enter key to confirm and save
the settings.
Preset recall
P1: The DSP 88 has a built in non-volatile memory that can store up to 30 different preset setups. This
control selects which program to recall from the non-volatile memory. The program name is
displayed to the right of the program no.