AMC CVT2030MKII Instructions For Installation & Operation Download Page 9

7

SPECIFICATIONS

Weltronics Corp. reserved the right to improve its products at any time. Specifications
are subject to change without notice.

Power output into 8/4 ohms

0 W

With both channels driven

Rated T.H.D. 45Hz-20KHz

1.0%

1KHz clipping power into 8/4 ohms

W

Input sensitivity for 1W/30W into 8 ohms

mV/1250 mV

Input impedance

500K ohms/470 pF

20Hz-20KHz

+/-0.5 dB

-3dB

10 Hz/80 KHz

"A" WTD

95 dB

UN-WTD

85 dB

Separation 20Hz-20KHz

>65 dB

Overall feed back

14 dB

Dimensions (WxHxD)

430x112x288 mm

Net weight

13 Kg

Shipping weight

Kg

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

With balanced bridged input module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . 230

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Frequency response:

Signal to noise ratio (ref. 1W/8 ohms):

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

PHYSICAL

Summary of Contents for CVT2030MKII













Reviews: