INSTALLATION NOTES
2
Since
the
generates
modest
amounts
of
heat,
adequate
ventilation is required. Do not place the
amplifier on a soft surface such as a
carpeted
surface
that
may
block
the
ventilation holes of the bottom cover. Also,
avoid obstructing the ventilation holes in the
top cover.
To prevent the risk of fire or
shock, do not allow any liquid or moisture to
enter into the internal parts of this product. If
any liquid accidentally enters this product,
shut off the power and remove the AC power
cord immediately. If the liquid is anything
other than clean water or pure alcohol, have
the
product
examined
by
a
service
technician. Servicing of this product should
be referred to a qualified service technician.
Your
amplifier is set to work on your
local mains supply voltage. Check that your
local mains supply voltage agrees with the
voltage setting indicated on the back panel of
the amplifier. If not, please contact your
dealer or national distributor for details on
how to proceed further.
The cores of the mains lead are coloured in
accordance with the following code:
Blue
-Neutral
Brown
-Live
Note: Export units for certain markets have
moulded mains plugs fitted as standard.
As the colours in the mains lead may not
correspond
with
the
coloured
markings
identifying
the
terminals
in
your
plug,
proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked by
the letter N, or coloured black or blue. The
wire which is coloured brown must be
connected to the terminal which is marked by
the letter L, or coloured red or brown.
AMC 2N100MKII
CAUTION:
AMC