Congratulations on your purchase stereo power amplifiers. This unit was developed using the
expertise of professional sound engineers and working musicians. You will find that your new
2A Series
has superior performance and greater flexibility than any other amplifiers in its price range. Please read this
manual carefully to get the most out of your new unit. Thanks for selecting
2A Series
.
What’s in the box?
Items those are included in the box:
•
2A Series amplifier
•
Instruction manual
•
Power cable
Features
•
Operating
features:
volume
controls;
balanced phoenix and XLR connectors, LINK
output, compressor, input sensitivity selector,
binding post and speakon
output connectors,
stereo/bridge/parallel mode, ground lift switch.
•
Safety/reliability features: 2 variable speed
fans for cooling, soft start, DC and thermal
overload protection; short circuit and speaker
protection.
•
Indications: power ON, clip, signal, and
protect LED indicators for each channel. Bridge
and parallel indicators.
•
Cabinet features: Roadworthy, rugged double
rack space (2 U) housing. Direction of cooling air
flow:
from
the
rear
to
the
front.
Hints on Installation
This user manual contains important information on operating
2A series
amplifier correctly and safety. Please
read it carefully before operating your amplifier.
INSPECTION
Your
2A Series
was carefully packed at the factory in packaging designed to protect the units in
shipment. Before installing and using your unit, carefully examine the packaging and all contents for any
signs of physical damage. If you find any damage, notify the shipping company immediately. Be sure to
save the carton and all packing materials for carrier inspection.
RACK MOUNTING
The
2A Series
amplifiers are designed for standard 19" rack mounting as well as stand alone. Use 4 screws
and washers for mounting to the front rack rails. It is also a good idea to support the amps in the rear,
especially for mobile use where the amps will be subjected to strong vibrations.
AMPLIFIER COOLING
Also pay close attention to the cooling requirements. Never block the air vents in the back, side and front
of the amplifier. Do not install the amplifier in a location that is exposed to direct rays of the sun or near
the hot appliance or radiators. Installation of the amplifiers in a damp or dust environment may result in
malfunction or accident. Please make sure to open the back doors, if installed in a rack. Periodically
remove the internal dust by using compressed air thought the external ventilation holes.