8
AMC VIBRATION SENSOR / ©AMC VIBRO Sp. z o.o.
3.2.
Technical specification
Table 1. Technical parameters of the AVS 2000R
Parameter
Description
Axes
2
Sensing element
Piezo-ceramic crystal
Measurement range
±20 g peak
Frequency response
0.4 - 10000 Hz for x and y axis (3 dB response)
Transverse sensitivity
0.05
Temperature measurement range
-20°C to 80°C
Sampling frequency
40 kHz
Sampling resolution
16 bit
Number of points - time waveform
4000 samples
Maximal recording duration
100 ms with 5 minutes interval
Acquisition modes
Periodic, warning-based, alarm-based
Vibration limit/ Shock limit
5000 g peak
Hazardous environment
non
Operating temperature
-40°C to 85°C
Network standard
Star / mesh topology
Radio standard
ISM 868 MHz (Europe) / 915 MHz (USA)
Wireless range
Up to 150 meters in a typical industrial conditions
Battery
7.2 V, 2 x AA-cell lithium-thionyl chloride (Li-SOCl
2
)
Battery lifetime
Up to 6 years
5800 measurements with network synchronization
8096 measurements without network synchronization
Dimensions
65 x 140 x 65 mm
Weight
500 g
IP rating
IP67
Built-in analysis
Measured value is vibration acceleration. Calculated estimates:
RMS & 0-Peak vibration acceleration [m/s
2
]
acceleration kurtosis [-]
acceleration envelope RMS and Peak-Peak [m/s
2
]
RMS & 0-Peak vibration velocity [mm/s]
ISO RMS velocity [mm/s]
Analysis in 8 defined bands (BEC) acceleration or velocity
