ACN-TL
Rev. 6.00
©2019, Ambient Recording GmbH
16
SYS Menu
↑
Menu
Config
Reset
Info
Menu
Lock/
Standard
/Extended
Defines the level depth and sophistication of available options.
“Lock”
prevents unwanted alterations to the settings. It is recommended to lock the unit after
configuration. To unlock you will be prompted to hold the configuration wheel left for 3 seconds after
which a unlock message will appear.
Note: Due to the power logic on ACN-TL, ACN-LS, and ACN-ML, this message will also pop up
when shutting down these units with the required long press to the configuration wheel. It is
however not necessary to unlock the menu to power down. Just keep the button pressed for 3
seconds and the unit will shut down as desired.
“Standard”
will only show valid settings that have proven practical for the majority of productions: We
highly recommend leaving it sitting here unless you run in apparent limitations to your required
configuration.
“
Extended
”
unlocks additional configuration options. This mode will unlock sync output for
3D
rigs,
more uncommon video and sync formats such as
PAL
,
NTSC,
or apply an
Offset
to the TC output for
compensation of frame processing delay.
Config
Display
RF
USB (L, LS) / LemoACN (TL)
Bat (L, TL, LS)
IR (E )
Display
Brightness: 1…
3
…10 →
AutoOff:5sec…
30sec
... never
Consecutively adjusts the OLED in brightness and timeout.
