Now take the timecode cable and con-
nect one NanoLockit to the „AUX / Mic In“
port of the audio recorder.
On the display, you will see no TC yet
because we need to set up the audio re-
corder for use with an external timecode
device first.
To do so, press „Menu“, then select „In
-
puts“, „Aux In Mode“ and „Timecode“.
Then go back to the Main Menu, switch
to the second page and select „Time-
code“, then „TC Mode“. Select „Aux In 1“
as source and check the display again.
Now you can see the correct timecode.
