increase (or decrease) the temperature reading, press and
hold the
CH/+
or
MIN/MAX
button.
To return the temperature to the actual or uncalibrated
measurement, press the
SET
button.
Once the displayed temperature equals the calibrated
source, press and hold the
SET
button for three seconds,
or wait 15 seconds for timeout, and the temperature value
will stop flashing.
4.7.2 Indoor Temperature Calibration
To enter the indoor temperature calibration mode, press
and hold the
SET and MIN/MAX
buttons at the same time
for 5 seconds and the
IN-TEMP
temperature value will
begin flashing. Press the
CH/+
button to increase the
temperature and the
MIN/MAX
button to decrease the
temperature reading in 0.1° increments. To rapidly
increase (or decrease) the temperature reading, press and
hold the
CH/+
or
MIN/MAX
button.
To return the temperature to the actual or uncalibrated
measurement, press the
SET
button.
Once the displayed temperature equals the calibrated
source, press and hold the
SET
button for three seconds,
or wait 15 seconds for timeout, and the temperature value
will stop flashing.
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 15
