Version 1.0
©Copyright 2012, Ambient LLC. All Rights Reserved.
Page 8
5
Specifications
5.1 Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement
Range
Accuracy
Resolution
Temperature
14 to 140 °F
± 2 °F
0.1 °F
Humidity
20 to 99 %
± 5%
1 %
Note
: when temperature or humidity read out of range, the display will read LL (out of range low) or
HH (out of range high).
5.2 Power Consumption
2 x AA 1.5V Alkaline or Lithium batteries (not included)
Battery life: Approximately one year
6
Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1.
2.
www.ambientweather.com/chat.html
3.
Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time)
Problem
Solution
Display console contrast is weak
Replace console batteries with a fresh set of batteries.
Temperature or humidity is inaccurate
Use the humidity and temperature calibration to match
your calibration source.
Temperature, Heat Index appear to read
high
Since heat index values were devised for shady
conditions, exposure to full sunshine can increase heat
index values by up to 15°F. Make sure you take your
readings in a shaded area if possible.
7
Accessories
The following software and hardware accessories are available for this weather station at
Accessory
Image
Description
Ambient Weather Humidity
Calibration Kits
One step calibration kits for digital
hygrometers use salt slurry formula to
accurately calibrate the indoor and outdoor
hygrometers.
8
Liability Disclaimer
Please help in the preservation of the environment and return used batteries to an authorized depot.
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in
wild country and/or in unauthorized grounds strongly damages the environment.
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any
