background image

 

Version 1.0  

 

©Copyright 2015, Ambient LLC. All Rights Reserved. 

 

 

 

Page 11 

6.2

 

Measurement Specifications 

The following table provides specifications for the measured parameters.   
 

Measurement 

Range 

Accuracy 

Resolution 

Indoor Temperature 

32 to 140 °F 

± 1 °F 

0.1 °F 

Outdoor Temperature 

-40 to 140 °F 

± 1 °F 

0.1 °F 

Indoor Humidity 

10 to 99 % 

± 5% (only guaranteed 
between 20 to 90%) 

1 % 

Outdoor Humidity 

10 to 99% 

± 5% (only guaranteed 
between 20 to 90%) 

1 % 

6.3

 

Power Consumption 

 

Base station (display console) : 4 x AAA 1.5V Alkaline or Lithium batteries (not included) 

 

Remote sensor : 2 x AAA 1.5V Alkaline or Lithium batteries (not included) 

 

Battery life:    Minimum 12 months for base station with one sensor and excellent reception. 
Intermittent reception and multiple sensors may reduce the battery life.   
Minimum  12  months  for  thermometer-hygrometer  sensor  (use  lithium  batteries  in  cold 
weather climates less than -4 °F) 

7

 

Troubleshooting Guide 

If your question is not answered here, you can contact us as follows: 
 

1.

 

Email Support: 

[email protected]

 

2.

 

Live Chat Support: 

www.ambientweather.com/chat.html

 (M-F 8am to 4pm Arizona Time) 

3.

 

Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time) 
 
 

Problem 

Solution 

Wireless remote (thermo-hygrometer) not 
reporting in to console. 
 
There are dashes (--.-) on the display 
console. 

If  any  of  the  sensor  communication  is  lost,  dashes  (--.-) 
will be displayed on the screen. To reacquire the signal, 
press  and  hold  the 

C

  button  for  3  seconds, 

and  the  remote  search  icon 

  will  be  constantly 

displayed.  Once  the  signal  is  reacquired,  the  remote 

search  icon 

  will  turn  off,  and  the  current  values 

will be displayed. 
 
The maximum line of sight communication range is 300’ 
and 100’ under most conditions. Move the sensor 
assembly closer to the display console. 
 
If the sensor assembly is too close (less than 5’), move 
the sensor assembly away from the display console. 
 
Make sure the remote sensor LCD display is working 
and the transmitter light is flashing once per 60 seconds. 
 
Install a fresh set of batteries in the remote 
thermo-hygrometer. For cold weather environments, 
install lithium batteries. 
 

Summary of Contents for WS-70















Reviews: