Version 1.2
©Copyright 2020, Ambient LLC. All Rights Reserved.
Page 15
Value Decrease key
Decrease the value during
alarm setup.
Scroll up/left key
Press this key to
scroll up/left.
Mode key
Press this key to enter to next mode
Return Key
Back to main menu of calibration mode.
Resume Key
Cancel the calibration and resume.
Figure 15
Scroll
to
the temperature, humidity, dew point or heat index min/max field you wish to
view, and press the
key. Note that dashes (--.-) will be displayed for sensors that are not
programmed for your system.
Figure 16
To clear all of the min and max values, refer to Section 4.4.2 for details.
4.3.2
Alarms
You can set a high and low temperature and humidity alarm on
Channels 1-8.
If the measured value is greater than the high alarm, an audible alert will sound and the alarm icon
will flash on the alarm panel, and the alarm icon
will appear on the main panel.
